AGC Gain Control Output |
(Radio Profiles, Audio Settings) |
Selects gain for the radio's microphones to either increase (positive values), decrease (negative values), or stay the same ("0"). The AGC Gain Control Output level is applied after AGC (Automatic Gain Control) has occurred. 
AGC Gain Control Output implements an infinity:1 dB ratio when microphone input is above the nominal level. That is, for any input above nominal, the output will never go above the level set via this parameter. This selection applies to the current Radio Profile.
|
|
If you set the Audio Configuration Level is set to "Basic", then the AGC Gain Control Output (Accessory) field is |
|
|
For Non-APX3000 radios, the AGC Gain Control Total (Accessory) value is synchronized from the AGC Gain Control Output (Radio). |
|
|
For APX3000 radios, the AGC Gain Control Total (Accessory) value is synchronized to the AGC Gain Control Output (Radio). |
|
|
AGC Gain Control Output is applied to any of the CPS-enabled AGC Fields. |
(If you set the Audio Configuration Level to "Basic") When one of the enable AGC field is enabled, then this field is enabled; or
(If you set the Audio Configuration Level to "Enhanced") When one of the enable AGC (Radio) field is enabled, then the AGC Gain Control Output (Radio) field is enabled. When any one of the enable AGC (Accessory) field is enabled, then the AGC Gain Control Output (Accessory) field is enabled.
The following table lists the minimum and maximum values for the AGC Gain Control Output as well as sample audio clips.
|
Minimum |
Maximum |
In Increments |
|
-12 decibels |
12 decibels
|
3 decibels
|
|
SELECTIONS: |
AUDIO CLIP |
|
When AGC Gain Control Output is "0" and AGC Gain Control Total is set to "6" |
|
|
When AGC Gain Control Output is "6" and AGC Gain Control Total is set to "9" |
|
|
When AGC Gain Control Output is "6" and AGC Gain Control Total is set to "0" |
